PDA

View Full Version : How to Launch/Retrieve a Special Forces (SF) Team



OneShot
05-30-2005, 07:57 PM
Taken from : SubSim DW Tactics & Tips (http://www.subsim.com/ssr/tip_dangerwaters.html)

Special Forces are launched from the Nav map at a specific surface or land target. Ownship speed must be at 3 kts or less and you must be at periscope depth or less.

Right-click the desired target to display the Contact menu. If Ownship is at periscope depth and has a speed of 3 kts or less, the Deploy Special Forces option is available in the Contact menu’s Engage With menu option.

Select DEPLOY SPECIAL FORCES. Your Executive Officer notifies you when the team is away. NOTE: The Deploy Special Forces menu option only appears when all of the following parameters are met. The SF team is still on board; Ownship is traveling at 3 kts or less; Ownship is at periscope depth or less; you are viewing the Contact menu for a surface platform, or land site. (Special Forces cannot be deployed against air or submarine platforms.)

TO RETRIEVE SPECIAL FORCES TEAM

When you are directed to retrieve a Special Forces team, maneuver the ship to the ordered location at the specified time and maintain the speed as designated in your tasking message.

While mission-specific instructions may vary, generally your speed must be 3 kts or less and you must be at periscope depth or less.

• To locate your team, you may need to use your radar and your periscope and maneuver as close as possible to the raft.

• When you are within the time, speed and location parameters specified in your tasking message.