Torpedo 53-65k runs directly under boat

[rylche]

In the kilo demo mission , i fired a 53-65k torpedo with settings depth : 10ft, floor : 20ft . however, when it approached the cargo ship, it just sailed right beneath the ship, and in the 3D view, it some sort of passed through the ship.

how do you make torpedoes become active after a set distance?

thanks in advance!

[OneShot]

The Setting "RTE" or Run to Enable sets the distance the torpedo has to travel before he goes active on his own. However if you use a wireguided torpedo you can Enable him whenever you want (and of course use the RTE).

For more details I defer to our Sub Guys here.

[rylche]

thanks! now i know what the RTE numbers mean. thanks once again :biggrin:

[SKeeM]

Also the Kilo has its depth settings in Meters not feet. So if you set it for 10 it would be 34 feet. 3 meeters is the setting i use.

[Molon Labe]

Wakehomers work just fine at 10m.

[LuftWolf]

If you did not have "show truth" on, then the ship was not represented in its actual location. With "show truth" off, the 3-d view only provides a representation of what has been input on the Nav Map through sensors and link information, etc.